Shenzhen Link-Card Tech Co., LTDMenu

UAV Infrared Thermal Imaging Module: 21mm Ultra-Compact/Super Resolution/Ultra-Low Latency/Multi-Interface

UAV Infrared Thermal Imaging Module: 21mm Ultra-Compact/Super Resolution/Ultra-Low Latency/Multi-Interface

    LC201 UAV Infrared Thermal Imaging Module

    1. Overview

    Link-Card Tech UAV infrared thermal imaging modules are graded by physical size into 21mm, 26mm and 32mm classes, matched respectively to small racing drones/FPV platforms, medium inspection UAVs and large industrial UAVs. All modules use uncooled vanadium oxide infrared detectors operating in the 8-14μm long-wave infrared atmospheric window. The 21mm-class LC201 module is built on a dedicated ASIC to achieve ultra-low power consumption (<200mA@5V) and ultra-light weight (31.3g including lens), engineered specifically for UAV platforms constrained by SWaP (size, weight and power).

    On resolution, 640×512 is the mainstream recommended configuration, suiting inspection, search and rescue and other applications that require fine image quality; 384×288 is available as an economy version for weight-sensitive scenarios such as FPV racing; and the 1280×1024 high-definition configuration is offered as a future upgrade option, providing four times the pixel coverage on 32mm-class modules. The modules support a range of output interfaces — the LC201 provides CVBS analogue video transmission and USB UVC digital output, matching FPV telemetry links and professional PC software, while the 32mm-class A1T series provides HDMI/SDI/AHD/USB multi-format output for the various video links used on large UAVs.

    2. Technical Specifications

    The table below lists the complete technical specifications for both resolution configurations of the LC201 module (21mm class), with 640×512 as the mainstream recommendation and the 1280×1024 high-definition configuration available on request. On NETD, the 640×512 configuration achieves ≤35mK and the 384×288 configuration ≤40mK.

    Parameter 384×288 Configuration 640×512 Configuration
    Detector Type Uncooled vanadium oxide infrared detector Same as left
    Resolution 384×288 640×512
    Pixel Pitch 12μm 12μm
    Spectral Response 8-14μm 8-14μm
    Frame Rate 25/30/50Hz 25/30Hz
    NETD ≤40mK@25℃,F#1.0 ≤35mK@25℃,F#1.0
    Processor Dedicated ASIC Dedicated ASIC
    Image Processing OCC/NUC/AGC/DDE OCC/NUC/AGC/DDE
    Noise Reduction 2D/3D noise reduction 2D/3D noise reduction
    Digital Zoom 1.0-4.0× 1.0-4.0×
    CVBS Output 720×576/PAL 720×576/PAL
    USB(UVC) Output YUV/MJPG/RAW14bits YUV/MJPG/RAW14bits
    Electronic Compass Supported Supported
    Image Stabilisation Supported Supported
    Power Supply 5-24V DC 5-24V DC
    Operating Current <200mA <200mA
    Power Consumption 1.2W 1.5W
    Module Dimensions (incl. lens) 41×22×22mm 41×22×22mm
    Weight (incl. lens) 31.3g 31.3g
    Lens Mount M20×0.5 M20×0.5
    Default Lens 9.1mm germanium glass 9.1mm germanium glass
    Operating Temperature -20℃~60℃ -20℃~60℃

    3. System Architecture

    The LC201 module uses a dedicated ASIC solution, in contrast to the ARM+DSP architecture of the A1T/A2T series. The ASIC implements the image processing pipeline (NUC/AGC/DDE/noise reduction/pseudo-colour mapping) in fixed hardware, requiring no general-purpose processor and substantially reducing both power consumption and latency. The SWaP-optimised design is evident across three dimensions: size (22×22mm PCB footprint), weight (31.3g including lens) and power (<200mA@5V), allowing the module to be mounted directly on a racing drone arm or FPV airframe without materially affecting flight performance.

    Image processing pipeline: OCC (bad pixel compensation) → NUC (non-uniformity correction) → 2D/3D noise reduction → AGC (automatic gain control) → DDE (digital detail enhancement) → pseudo-colour mapping → output encoding. The stabilisation algorithm (EIS) applies electronic image stabilisation using gyroscope data from the motion sensor, compensating for image shake caused by airframe vibration. The electronic compass supplies bearing information overlaid on the image HUD. The CVBS encoder outputs PAL analogue video, while the USB UVC controller outputs three digital formats: YUV, MJPG and RAW14bits.

    32mm-class A1T architecture (for large UAVs): the A1T series uses an ARM+DSP architecture with 2Gb DDR memory, supporting more complex image processing algorithms. It provides parallel multi-format output over HDMI (1024×768@50Hz), AHD (720P/PAL), SDI (720P/PAL) and USB UVC, matching the various video downlinks used on large UAVs. A 25mm standard lens is fitted as standard, with optional 9.1mm/35mm/50mm focal lengths for different flight altitudes and mission requirements. An automatic recognition and tracking module can be added for automatic target lock-on and tracking, suiting high-altitude long-range law enforcement evidence collection and reconnaissance missions.

    4. Interface Definition

    Interface Type Specification Function
    CVBS 720×576/PAL Analogue video link / FPV telemetry
    USB UVC driver-free Digital video link / professional PC application
    Professional Application Android/Windows/Mac Live preview / parameter adjustment / recording
    Power 5-24V DC Wide-voltage supply / direct battery connection

    Intelligent functions: the electronic compass overlays bearing information on the image, displaying heading angle in real time during flight; the stabilisation algorithm (EIS) applies electronic image stabilisation from motion sensor data, compensating for the high-frequency vibration of multirotor airframes; and the low-power design (<200mA@5V) maximises flight endurance, which is particularly critical for racing drones with limited battery capacity.

    Function Description
    Electronic Compass Bearing information overlaid on the display
    Stabilisation Algorithm Electronic image stabilisation (EIS), suited to airborne vibration environments
    Low-Power Design <200mA@5V, extending flight endurance

    5. Application Scenarios

    Different classes of UAV impose different requirements on module size, weight, output interface and lens focal length. The table below is a UAV selection guide, with recommendations graded by module physical size.

    UAV Class Module Size Recommended Model Lens Weight Characteristics
    Small UAV / racing drone / FPV 21×21mm LC201 9.1mm germanium lens 31.3g Ultra-light, CVBS+USB output, low power
    Medium inspection UAV 26×26mm (mid-size model) Longer focal length lens Moderate Higher payload capacity, accepts telephoto lenses
    Large industrial UAV 32×32mm A1T series 25mm standard lens 59g Multiple interfaces (HDMI/SDI/AHD/USB), optional automatic recognition and tracking module, higher and longer-range flight

    FPV racing drones: racing platforms demand extreme light weight and low latency. At 31.3g including lens, the LC201 has minimal impact on flight performance, and its CVBS output connects directly to a 5.8GHz analogue video transmitter with latency below 50ms. The 9.1mm germanium lens provides a wide field of view (FOV≥50°), meeting the needs of fast navigation and obstacle awareness. The 384×288 economy version offers the best weight and power figures for weight-sensitive FPV applications, while the 640×512 version delivers a clearer thermal image for racing applications that also require video quality.

    Inspection UAVs (power lines / building facades / solar panels): quadrotor inspection UAVs have greater payload capacity than racing platforms and can carry 26mm-class mid-size modules or 32mm-class A1T modules. The 640×512 mainstream resolution is recommended, providing finer temperature detail at inspection standoff distances. The A1T series' multi-interface output (HDMI/SDI/AHD/USB) matches different downlink architectures — HDMI connects directly to an onboard display, SDI provides lossless long-distance transmission to the ground station, and AHD integrates with coaxial video transmission systems. The 25mm standard lens suits inspection missions at moderate flight altitudes, while 35mm/50mm telephoto lenses are appropriate for pulling in observation detail during high-altitude inspection. In power line inspection, thermal imaging reveals hazards such as overheating insulators and hot conductor joints; in building facade inspection it identifies damaged insulation layers and water ingress points; and in solar panel inspection it locates modules affected by hot spots.

    Search and rescue and industrial UAVs: large industrial UAVs have ample payload capacity and can carry A1T series modules together with the automatic recognition and tracking module to perform personnel search, agricultural and forestry survey and law enforcement evidence collection at high altitude and long range. The A1T is fitted with a 25mm lens as standard, with optional 9.1mm/35mm/50mm lenses for different flight altitudes and mission requirements — 9.1mm wide field of view for rapid scanning during low-altitude search, and 50mm narrow field of view for precise detection at high altitude and long range. 640×512 resolution is the first choice, providing more pixels on target during long-range personnel search; the 1280×1024 high-definition configuration offers the ultimate detail resolution capability on 32mm-class modules. The 5-24V wide-voltage supply connects directly to the UAV battery with no additional power conversion.

    6. Mechanical Dimensions

    The LC201 module (including lens) measures 41×22×22mm and weighs 31.3g, with an M20×0.5 lens mount and a 9.1mm germanium glass lens as the default configuration. The A1T series module (excluding lens) measures 32×32×43.70mm and weighs 59g, with an M25×0.5 lens mount. Both modules operate from a 5-24V DC wide-voltage supply over a temperature range of -20℃~60℃.

    Module Dimensions Weight Lens Mount Processor
    LC201 (21mm class) 41×22×22mm (incl. lens) 31.3g M20×0.5 ASIC
    A1T (32mm class) 32×32×43.70mm (excl. module) 59g M25×0.5 ARM+DSP

    A1T series lens options: the focal length choices available for different flight altitudes and mission requirements are listed below.

    Lens Focal Length Field of View (FOV) Flight Scenario
    9.1mm Wide Low-altitude search / wide-area scanning
    25mm Medium Standard inspection (fitted as standard)
    35mm Medium-narrow Medium to high altitude long-range detection
    50mm Narrow High-altitude long-range precision detection

    7. Ordering Information

    UAV infrared modules are offered in configurations combining module physical size (21mm/26mm/32mm) with resolution. Give preference to the 640×512 mainstream resolution; the 384×288 economy version suits weight-sensitive FPV applications, and the 1280×1024 high-definition configuration is available as a custom option on 32mm-class modules.

    Model Module Size Resolution Default Lens Suitable UAV
    LC201-640 21×21mm 640×512 9.1mm Small high-definition UAV / FPV
    LC201-384 21×21mm 384×288 9.1mm Small UAV / FPV (economy version)
    (mid-size)-640 26×26mm 640×512 Telephoto lens Medium high-definition inspection UAV
    (mid-size)-384 26×26mm 384×288 Telephoto lens Medium inspection UAV
    A1T-HDMI-640 32×32mm 640×512 25mm Large high-definition industrial UAV
    A1T-HDMI-384 32×32mm 384×288 25mm Large industrial UAV

    8. References

    1. Operating principle of uncooled vanadium oxide microbolometers: Rogalski A., "Infrared Detectors", 2nd Edition, CRC Press, 2011.

    2. Infrared module design methodology under SWaP constraints: Fischer R.E. et al., "Optical System Design", 2nd Edition, McGraw-Hill, 2008.

    3. UAV infrared thermal imaging application reference: Chinese national standard GB/T 38082-2019, "Technical requirements for civil unmanned aircraft application systems".

    4. Electronic image stabilisation (EIS) algorithm principles: IEEE Trans. Image Processing, Vol. 19, No. 9, "Digital Image Stabilization: Algorithms and Systems".

    【Back】

Need selection advice or a custom solution?

Link-Card provides thermal module selection, secondary development and full-system solution support.

Our sales team will reply to the email or phone number you leave. You can also email sales@link-card.com directly.