Gigabit Network Infrared Thermal Module: GigE/ONVIF/RTSP/RTMP/WEB Multi-Protocol Support
Gigabit Network Infrared Thermal Module: GigE/ONVIF/RTSP/RTMP/WEB Multi-Protocol Support

1. Overview
The A2T-ETH series gigabit network infrared thermal imaging modules are built on Link-Card Tech uncooled vanadium oxide infrared detectors, targeting networked security surveillance and industrial machine vision applications. The module integrates an 8-wire gigabit Ethernet interface and supports both the GigE Vision and Onvif/RTSP network video protocols, enabling long-distance IP video transport and remote device management. USB UVC and CVBS analogue outputs are retained for local commissioning and integration into hybrid-architecture systems.
The A2T-ETH accepts a 6-24V DC wide-voltage input, making it compatible with the various power schemes found on industrial sites (12V battery banks, 24V industrial supplies, PoE repeaters and so on) without any intermediate regulation. The module measures 32×32×43.70mm (excluding lens) and weighs 59g, with an M25×0.5 lens mount and an operating temperature range of -20℃~60℃, meeting the requirements for outdoor and industrial deployment.
640×512 is the mainstream recommended configuration for the A2T-ETH, with 384×288 available as a standard economy option and 1280×1024 high-definition offered as a custom configuration. As its key differentiating feature, the A2T-ETH supports dual raw data output — the NUC-corrected 14bit RAW image and the AGC-processed 8bit image can be acquired simultaneously, allowing users to apply custom algorithms, AI thermal analytics and in-depth research to the raw data. This capability is particularly valuable in the 640×512 and 1280×1024 high-definition configurations, providing a low-level data interface for industrial vision and intelligent security applications.
2. Technical Specifications
The table below lists the complete technical specifications for both A2T-ETH resolution configurations, with 640×512 as the mainstream recommendation and the 1280×1024 high-definition configuration available on request. On NETD, the 640×512 configuration achieves ≤35mK and the 384×288 configuration ≤40mK.
| Parameter | 384×288 Configuration | 640×512 Configuration |
|---|---|---|
| Detector Type | Uncooled vanadium oxide infrared detector | Same as left |
| Resolution | 384×288 | 640×512 |
| Pixel Pitch | 12μm | 12μm |
| Spectral Response | 8-14μm | 8-14μm |
| Frame Rate | 25/30/50Hz | 25/30Hz |
| NETD | ≤40mK@25℃,F#1.0 | ≤35mK@25℃,F#1.0 |
| Processor | ARM+DSP | ARM+DSP |
| Memory | 2Gb DDR | 2Gb DDR |
| Ethernet | 8-wire gigabit | 8-wire gigabit |
| Video Output | USB(UVC) + CVBS | USB(UVC) + CVBS |
| CVBS Resolution | 720×576/PAL | 720×576/PAL |
| USB(UVC) Resolution | 384×288 | 640×512 |
| Power Supply | 6-24V DC wide voltage | 6-24V DC wide voltage |
| Power Consumption | ≤2W | ≤2.5W |
| Dimensions (excl. module) | 32×32×43.70mm | Same as left |
| Weight (excl. module) | 59g | 59g |
| Lens Mount | M25×0.5 | M25×0.5 |
| Operating Temperature | -20℃~60℃ | -20℃~60℃ |
3. System Architecture
The A2T-ETH system consists of the infrared detector, the ARM+DSP processing platform, the gigabit Ethernet controller, the video encoding engine and a multi-protocol network stack.
Detector and signal processing: the uncooled vanadium oxide microbolometer absorbs target infrared radiation in the 8-14μm band; after ROIC readout and 14bit ADC quantisation the data is passed to the ARM+DSP processing platform. The image processing pipeline executes NUC (non-uniformity correction), AGC (automatic gain control), 2D/3D noise reduction, DDE (digital detail enhancement) and pseudo-colour mapping, and the processed image data is then distributed across the multiple output channels.
Network video transport architecture: the gigabit Ethernet controller (8-wire RJ45) supports two protocol stacks. The GigE Vision protocol runs over UDP with a separated GVCP (control channel) and GVSP (stream channel) architecture, offering low latency and high bandwidth utilisation (payloads up to 9000-byte Jumbo Frames); it suits industrial automation scenarios in machine vision that require low-latency, high-frame-rate image acquisition. The Onvif/RTSP protocol uses TCP for control plus UDP for the media stream: RTSP handles session establishment and control while RTP/RTCP carries the video stream with H.264/H.265 compression, giving compatibility with NVRs, VMS platforms and security management systems of all kinds.
Parallel multi-channel output: the gigabit Ethernet, USB UVC and CVBS outputs can operate in parallel. Gigabit Ethernet carries the primary video stream and remote control; USB UVC serves local PC commissioning and raw data capture; CVBS provides 720×576/PAL analogue video as a backup channel or for connection to an analogue matrix. The wide-voltage supply (6-24V DC) uses an integrated DC-DC converter that maintains a stable 5V logic rail for any input voltage between 6V and 24V.
4. Interface Definition
| Interface Type | Specification | Function |
|---|---|---|
| Gigabit Ethernet | 8-wire RJ45 | Network video transport / control |
| USB | UVC | Local commissioning / video output |
| CVBS | 720×576/PAL | Analogue video output |
| Power | 6-24V DC | Wide-voltage supply |
| RS-485 | PELCO-D (Onvif version only) | PTZ pan-tilt control |
Protocol comparison: the GigE Vision version targets industrial machine vision, with low protocol overhead, Jumbo Frame support and latency controllable to the millisecond level, suiting real-time inspection and closed-loop control on automated production lines. The Onvif version targets the security surveillance market, supporting standard NVR/VMS platform integration, RS-485 PELCO-D pan-tilt control and up to 4 simultaneous preview channels, suiting perimeter protection and multi-site monitoring.
| Parameter | A2T-ETH-GigE | A2T-ETH-Onvif |
|---|---|---|
| Transport Protocol | GigE Vision | Onvif/RTSP |
| Platform Integration | GigE/RTSP/DHCP | Onvif/RTSP/HTTP/DHCP |
| PTZ Control | — | RS-485 (PELCO-D) |
| Simultaneous Preview | — | Up to 4 channels |
| Target Application | Industrial machine vision | Security surveillance / perimeter protection |
Dual raw data output (key feature): the capability that distinguishes the A2T-ETH from the A1T series is parallel dual raw data output. Users can simultaneously acquire the NUC-corrected 14bit RAW image and the AGC-processed 8bit display-ready image — the former retains the full radiometric information for custom algorithms and AI analysis, while the latter can be previewed directly. This feature is especially valuable in the 640×512 and 1280×1024 high-definition configurations, where a larger pixel array provides richer data dimensionality for training and inference of deep-learning thermal imaging models.
| Output Mode | Data Width | Processing Stage | User Application |
|---|---|---|---|
| 14bit RAW | 14bit | After NUC correction | Raw data for user-defined further processing (custom algorithms / AI analysis) |
| 8bit AGC | 8bit | After AGC processing | Display-ready image for direct preview |
5. Application Scenarios
Perimeter protection and security surveillance: the A2T-ETH-Onvif model integrates with NVR or VMS security management platforms over standard Onvif/RTSP, forming a complementary thermal-plus-visible perimeter monitoring system alongside visible-light cameras. Thermal imaging detects intruding personnel or vehicles in complete darkness, unconstrained by lighting conditions, while the visible-light channel handles detail recognition (faces, licence plates). The RS-485 PELCO-D interface supports linked PTZ pan-tilt units for automatic target tracking. The 640×512 high-definition version covers a wider perimeter span, reducing the number of deployment sites required.
Border and frontier surveillance: in long-range perimeter scenarios such as border lines and coastlines, the thermal module achieves long-distance IP transport via gigabit Ethernet to fibre conversion. The 6-24V wide-voltage supply is compatible with solar power systems, enabling deployment in remote areas without grid access. With thermal sensitivity of NETD≤40mK, human targets can be detected at ranges beyond 1km (depending on lens focal length).
Industrial control and machine vision: the A2T-ETH-GigE model supports the GigE Vision protocol and integrates with industrial machine vision software (such as Halcon, LabVIEW Vision and MVTec Merlic) for in-line temperature inspection and quality control. The low latency of GigE Vision supports real-time closed-loop control — a PLC action can be triggered the instant a product temperature exceeds its limit. The 640×512 mainstream configuration is recommended: at 50Hz frame rate it meets the real-time requirements of high-speed production lines while providing finer thermal field detail; the 1280×1024 high-definition configuration suits large-area array inspection. Combined with dual raw data output (14bit NUC + 8bit AGC), users can train custom AI thermal analysis models on the 14bit RAW data to implement intelligent applications such as anomaly detection and defect classification.
Fire early warning: thermal imaging measures temperature field distribution without contact and raises an alarm when the monitored area exceeds a preset threshold. It suits warehouses, oil tank farms and forest fire prevention. Compared with smoke or heat detectors, infrared thermal imaging can identify hot spots at a distance and issue a warning before a fire spreads.
Substation monitoring: outdoor substations house densely packed equipment, and thermal imaging provides non-contact temperature monitoring of transformers, isolating switches and busbar joints. The Onvif version integrates with substation integrated video surveillance systems, and the multi-channel simultaneous preview function allows 4 critical points to be monitored at once.
6. Mechanical Dimensions
The A2T-ETH module measures 32×32×43.70mm (excluding lens) and weighs 59g, mechanically compatible with the A1T series. The M25×0.5 lens mount accepts the full range of Link-Card Tech infrared lenses. Gigabit Ethernet is brought out on an RJ45 connector (8-wire full duplex), the USB Type-C connector carries both power and data, and CVBS is output via an MCX or BNC connector. M2.5 mounting holes are provided at the four corners of the PCB. The wide-voltage supply (6-24V DC) is compatible with standard 12V/24V power buses on industrial sites.
| Dimensional Parameter | Value | Notes |
|---|---|---|
| Outline dimensions (excl. module) | 32×32×43.70mm | Including connectors |
| Weight (excl. module) | 59g | Including PCB |
| Lens mount | M25×0.5 | Threaded connection |
| Network interface | 8-wire RJ45 | Gigabit Ethernet |
| Power supply | 6-24V DC | Wide-voltage input |
| Mounting holes | 4×M2.5 | Four corners |
The A2T-ETH series accepts infrared lenses of several focal lengths, with a 25mm lens fitted as standard; users can select according to monitoring distance and field-of-view requirements.
| Lens Focal Length | Field of View (FOV) | Application |
|---|---|---|
| 9.1mm | Wide | Short-range wide-angle monitoring / large-area coverage |
| 25mm | Medium | Standard security / industrial monitoring (fitted as standard) |
| 35mm | Medium-narrow | Medium to long range detection / border surveillance |
| 50mm | Narrow | Long-range precision temperature measurement / substations |
7. Ordering Information
The A2T-ETH series is offered in 4 standard models combining network protocol (GigE Vision / Onvif/RTSP) and resolution. Begin selection by identifying the application domain — GigE Vision for industrial machine vision, Onvif for security surveillance — and give preference to the 640×512 mainstream resolution; the 384×288 standard economy version suits budget-constrained deployments, and the 1280×1024 high-definition model is available as a custom configuration. Configurations of 640×512 and above support dual raw data output (14bit NUC + 8bit AGC), providing a low-level interface for AI thermal analysis applications.
| Model | Protocol | Resolution | Application |
|---|---|---|---|
| A2T-ETH-GigE-640 | GigE Vision | 640×512 | Mainstream recommendation: industrial machine vision / AI analysis |
| A2T-ETH-Onvif-640 | Onvif/RTSP | 640×512 | Mainstream recommendation: security surveillance / perimeter protection |
| A2T-ETH-GigE-384 | GigE Vision | 384×288 | Standard economy version: industrial automation inspection |
| A2T-ETH-Onvif-384 | Onvif/RTSP | 384×288 | Standard economy version: security NVR integration |
8. References
1. GigE Vision standard specification: Automated Imaging Association (AIA), "GigE Vision Standard", Version 2.0/2.1.
2. Onvif core specification: ONVIF, "ONVIF Core Specification", Version 20.12.
3. RTSP/RTP streaming media protocols: IETF RFC 2326 (RTSP), RFC 3550 (RTP).
4. PELCO-D pan-tilt control protocol specification: Pelco Inc., "PELCO-D Protocol Specification".
5. Substation infrared online monitoring technical specification: Chinese power industry standard DL/T 1284-2012, "Technical specification of infrared on-line monitoring device for substation equipment".
