In the thermal imaging industry chain, vendors differ markedly in what they actually ship: detector dies, thermal imaging core modules, and complete camera systems are distinct technical segments, each with its own technology barriers and business model. This article sorts out the three segments and maps representative uncooled detector manufacturers — in China and abroad — along the VOx and amorphous silicon routes.
1. The three industry-chain segments: detector die, core module, and complete camera
The uncooled thermal imaging industry chain divides into three segments, with technology barriers and product forms shifting from one layer to the next.
The detector die (FPA) is the segment with the highest technology barrier: a MEMS microbridge array is built on top of a silicon readout integrated circuit (ROIC), a vanadium oxide or amorphous silicon thermosensitive layer is deposited, and the device leaves the fab after wafer-level packaging. It sets the upper bound of a thermal camera's sensitivity and resolution, and it is also the segment with the largest R&D investment and the longest development cycles.
The thermal imaging core module (core / module) integrates the detector, infrared lens, drive electronics, and image algorithms (NUC, AGC, pseudo-color, noise reduction) on a single board, outputting standard video or digital images. Core modules are the main purchasing form for system integrators; adding a housing, display, and user interface on top of one yields a complete camera.
The complete camera / system (thermal camera / imager) adds mechanics, display, power supply, and ingress protection on top of the core, delivering a usable product for a specific scenario — security, temperature measurement, observation and aiming, or automotive.
The three segments do not map one-to-one onto vendor types: vertically integrated vendors such as Teledyne FLIR and Guide Sensmart cover everything from die to complete cameras; Raytron and Lynred focus on detector dies and core modules; Seek Thermal develops its own detectors and concentrates on consumer-grade cameras.
2. Technology routes: VOx and amorphous silicon
The thermosensitive materials of uncooled microbolometers fall into two mainstream categories: vanadium oxide (VOx) and amorphous silicon (a-Si). The trade-off between the two is the industry-level reflection of the device-physics balance among TCR, 1/f noise, and NETD.
Early VOx had lower 1/f noise, and the volume-production uncooled parts from Teledyne FLIR, Raytron / InfiRay, Guide Sensmart, and HIKMICRO follow this route. a-Si is CMOS-compatible with good uniformity; the PICO and ATTO lines of Lynred (formerly ULIS) and Dali Technology are its representatives. The gap has narrowed: the PICO640S carries a rated NETD of <30 mK (f/1, 300 K, 30 Hz). Dali built a 12 μm, 3072×2048 amorphous silicon sample in 2019, but the company's announcement at the time stated that it was not yet in volume production or on sale, so it cannot be treated as a catalog part. The YOCTO1024 that Lynred announced in 2026 is 8.5 μm, and the vendor's material states VOx — it is not a simple continuation of the a-Si product line.
The material name alone does not decide who is more sensitive. The historical strength of VOx is noise; that of a-Si is uniformity and large-array processing. When sizing up a vendor, first work out whether it sells dies, core modules, or complete cameras, then look at the NETD conditions stated in the datasheet.
3. Representative overseas vendors
Teledyne FLIR (United States) is the pioneer of commercialized uncooled VOx technology and a leading supplier; its TAU and Boson core families are widely supplied to camera makers as OEM products, and the company is vertically integrated across security, defense, industrial, and consumer product lines.
Lynred (France) was formed in 2019 by the merger of cooled-detector maker Sofradir and uncooled maker ULIS. Its uncooled products have long centered on a-Si microbolometers (PICO at 17 μm, ATTO at 12 μm); the YOCTO1024 announced in 2026 is 8.5 μm, and the vendor's documentation now states VOx. The material boundary with US-style VOx is not fixed once and for all.
Seek Thermal (United States) uses self-developed VOx detectors; its products are mainly consumer-grade and smartphone-attached thermal cameras, and it has significantly lowered the civilian entry barrier to thermal imaging.
In military and special domains, US vendors such as Leonardo DRS and BAE Systems build their own military uncooled detectors; this part of the market is governed by export controls (ITAR / EAR) and is relatively insulated from the civilian market.
4. Representative Chinese vendors
Raytron (Yantai) develops and mass-produces its own uncooled detector dies. The company announced an 8 μm, 1920×1080 device in 2021 and a 6 μm, 640×512 device in 2024; per the company's 2025 statement, the volume-production timing of the latter depends on process maturity and demand, so it should not be written up as a broadly shipping catalog part. Its wholly owned subsidiary InfiRay builds core modules and complete cameras, and detector product pages are hosted by Raytron Microelectronics (raytron-microelectronics.com).
Guide Sensmart (Wuhan) follows a self-developed-detector plus vertically integrated camera route, covering industrial temperature measurement, security, and defense applications; it is one of the few Chinese vendors with both cooled and uncooled detector capability.
Dali Technology (Zhejiang) started with amorphous silicon and emphasizes large arrays. Its 2022 annual report states that VOx detectors have also entered volume production — both routes are now present. For any specific die, the material column of the datasheet remains the authority.
HIKMICRO covers detectors, core modules, and security cameras, with public models of its 12 μm VOx detectors spanning 256×192 to 1280×1024. IoT cores and bi-spectrum cameras are its main product forms in surveillance scenarios.
Beyond these, AKIC Technology (Beijing) enters the market with high-precision fully digital readout circuits, offering uncooled detectors in formats from 384 to 1280; Teemsun has both cooled and uncooled detector development capability, and its Shanghai uncooled line is already in production; Vital Optics Technology (VOT), beyond infrared optical materials, operates an 8-inch silicon-based MEMS uncooled detector line; together with vendors such as GWIC, China can now supply itself from materials and dies to core modules. Civilian and industrial projects no longer have to buy American or French detectors.
5. The vendor landscape at a glance
The table below summarizes the positioning of detector manufacturers in China and abroad by segment × route, as a reference for newcomers. For the performance of any specific device, the measured values in the vendor's datasheet under the stated test conditions remain the authority.
Table 1. Overview of uncooled infrared detector manufacturers in China and abroad
| Vendor | Country | Main segment | Technology route | Focus areas |
|---|---|---|---|---|
| Teledyne FLIR | United States | Die → complete camera (vertical) | VOx | Security / defense / industrial / OEM cores |
| Lynred | France | Detector die | a-Si (PICO/ATTO) + cooled; YOCTO1024 is 8.5 μm VOx | European industrial / research |
| Seek Thermal | United States | Complete cameras / consumer | VOx | Consumer / smartphone add-ons |
| Leonardo DRS / BAE | United States | Die → systems (military) | VOx / cooled | Defense |
| Raytron / InfiRay | China | Die → cores / complete cameras | VOx | Small-pixel dies / cores / cameras |
| Guide Sensmart | China | Die → complete camera (vertical) | VOx + cooled | Industrial thermography / security / defense |
| Dali Technology | China | Die → complete camera | Mainly a-Si; VOx also in production | Large arrays / thermography / automotive |
| HIKMICRO | China | Die → cores / security cameras | VOx | Security / IoT cores |
| AKIC Technology | China | Detector die | Uncooled | Fully digital readout / 384–1280 |
| Teemsun | China | Detector die | Cooled + uncooled | Both routes / uncooled line in production |
| Vital Optics Technology (VOT) | China | Materials → detector die | Uncooled (MEMS) | Infrared materials / 8-inch MEMS line |
6. Representative Chinese complete-camera and system vendors
Beyond detector dies, China has also built a cohort of capable complete-camera and system vendors covering security monitoring, industrial temperature measurement, outdoor observation and aiming, and inspection. The profiles below are based on public information.
- Zhaosheng Technology (Hangzhou): focused on thermal imaging system R&D and turnkey solutions, and one of the Chinese vendors mass-producing shutterless infrared cores and complete systems; its products serve railway, port, UAV, and oilfield monitoring.
- Dahua Technology (Hangzhou): a video-centric smart IoT vendor whose thermal imaging line covers temperature measurement, bi-spectrum security, and blackbody-based temperature screening solutions.
- SAT Infrared (Guangzhou): founded in 1991, among the first in China to apply thermal cameras to industrial inspection; it undertook the national Torch Program project "uncooled focal-plane-array thermal camera" and has expanded toward consumer products in recent years.
- PARD (Shenzhen): focused on civilian observation-and-aiming products such as night-vision devices, thermal imagers, and thermal sights, with sizable shipments to overseas civilian markets.
- Sytong: founded in 2013, focused on night-vision and thermal imaging cameras for field observation, search and rescue, and security, exporting to Europe, the Americas, and Southeast Asia.
- Inreii (Hefei): Raytron's camera and terminal brand, covering thermal cameras, core modules, and outdoor, automotive, and temperature-measurement terminals.
- ULIRVISION (Zhejiang): focused on infrared, ultraviolet, and gas imaging, with products used in power-line inspection and industrial patrol, exported to many countries.
- Xingfeida (Guangzhou): builds optoelectronic imaging components, servo drives, and industrial inspection thermal cameras on the basis of thermal imaging and low-light night vision.
- FOTRIC (Shanghai): founded in 2011, focused on high-end temperature measurement and scientific/industrial thermal cameras, spanning handheld, online, and acoustic-thermal imaging.
- CONOTECH (Wuhan, formerly Wuhan Shituo): makes handheld and clip-on thermal imagers for the outdoor and observation market.
These camera vendors focus on camera design and system integration — some develop their own core modules, others buy detectors or cores — and together with the upstream detector makers they form a complete domestic infrared industry chain; when placing them on the map, they belong in the complete-camera/system segment, distinct from detector manufacturers. The full chain of China's infrared industry (materials, dies, modules, cameras, and test) can also be observed in one place at the CIOE infrared technology and application exhibition in Shenzhen.
7. How newcomers can build a picture of the industry
Faced with so many vendors, three questions help you place each one:
- Segment: die, module, or complete camera — this determines the product form and technical depth.
- Technology route: VOx or a-Si — this determines the orientation toward sensitivity, uniformity, and cost.
- Datasheet test conditions: NETD must come with test temperature, F-number, and frame rate (e.g. @25 °C, F/1.0, 30 Hz); numbers detached from their stated conditions are not comparable — see the previous article on NETD.
Placing vendors on the segment × route grid and checking datasheets' stated conditions turns scattered vendor information into an understandable structure. The same three questions apply when reading technical documents or evaluating parts.
Conclusion
When reading vendor material, first pin down three things: whether it sells dies, core modules, or complete cameras; whether the thermosensitive layer is VOx or a-Si — and whether that distinction still holds for its newest models; and whether an F-number, frame rate, and temperature sit next to the NETD figure. Without these three, a list of model numbers cannot be used to compare sensitivity.
